1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
#sample configuration for lightsd
#path to backlight control in sysfs
#expected files are max_brightness and brightness
lcd_backlight_control=/sys/class/backlight/intel_backlight
#path to keyboard backlight control in sysfs
#expected files are max_brightness and brightness
#leave empty or comment out if your laptop does not have keyboard backlight
kbd_backlight_control=/sys/bus/platform/devices/thinkpad_acpi/leds/tpacpi::kbd_backlight
#list of (*increasing* _integer_) threshold values from the ambient light sensor, separated by commas
lcd_backlight_thresholds=10,20,50,100,500,2000,10000
#list of (_integer_) brightness values (in percentage) corresponding to the thresholds
#should have one more element than the threshold list
lcd_backlight_values=3,5,10,15,30,60,80,100
#seconds before a brightness change really takes place
#(any als reading change crossing a threshold resets the timer)
lcd_backlight_control_delay=3
#don't trigger a brightness change until sensor reading away from
#the threshold exceeds this value
#this is a relative value, multiplied by logarithm of the compared
#threshold before using
lcd_backlight_trigger_range=2
#minimum _absolute_ value for lcd backlight
lcd_backlight_min_value=1
#same as their lcd conterpart
kbd_backlight_thresholds=40
kbd_backlight_values=50,0
kbd_backlight_control_delay=5
kbd_backlight_trigger_range=2
#kbd_backlight_min_value=0
#where to create the fifo for remote control
#leave empty or comment out to disable
command_fifo_path=/tmp/lightsd.cmd.fifo
#set to true if you want the reading from als to be printed to stdout everytime it changes
als_print_value=false
|
