- <li><a class="toctarg" href="#tocanch0">The Encounter</a></li><li><a class="toctarg" href="#tocanch1">The Module</a></li><li><a class="toctarg" href="#tocanch2">The Setup</a></li><li><a class="toctarg" href="#tocanch3">The Sounds</a></li><li><a class="toctarg" href="#tocanch4">The Editability</a></li><li><ul class="tocnode"><li><a class="toctarg" href="#tocanch5">The Quirks</a></li></ul></li><li><a class="toctarg" href="#tocanch6">The Manual</a></li><li><a class="toctarg" href="#tocanch7">The Insides</a></li><li><a class="toctarg" href="#tocanch8">The Secrets</a></li><li><ul class="tocnode"><li><a class="toctarg" href="#tocanch9">Test mode</a></li><li><a class="toctarg" href="#tocanch10">unknown (likely firmware update) mode</a></li></ul></li><li><a class="toctarg" href="#tocanch11">The Conclusion</a></li><li><a class="toctarg" href="#tocanch12">The … Death?</a></li></ul>

- <li style="margin-left:-0.5em"><a id="nextp" href="Privacy.html">Next post</a></li>

-<p>I was intrigued by the insides of EDIROL’s SD-20. How on earth did Roland squeeze half of SD-80’s content in to a package that’s smaller than SD-80’s main board? Turns out it was by crippling the product…</p>

-<p>I didn’t get my SD-20 for $50 as promised in my SD-80 article. The lowest price I found when I started watching for spares again was $75. It stayed there for over half a year. But just weeks before I got into the States, it was gone. All the rest of the listings asked for ridiculous prices ranging from $150 to $250. There’s no way I will pay over $100 for a SD-20. So I waited and waited…</p>

-<p>Until one day a new listing popped up. It was exactly $100 (with free shipping). “Well,” I thought, “this is it.” It accepts best offer, but nobody else offered to buy it until the listing ended. That’s the bizarre story of me getting my SD-20 at my max acceptable price…</p>

-<p>I felt the cheapness inside instantly when I picked up the package: the SD-20 (with the included, somewhat dodgy aftermarket power adapter) weights absolutely nothing! It’s even lighter than the ThinkPad mouse I occasionally use. That doesn’t inspire much faith on its insides.</p>

-<p>The exterior of the module is made of plastic exclusively. No metal whatsoever (except on the connectors). SD-80’s metal front cover weights more than this entire thing…</p>

-<p>Flipping the module around reveals the dreaded three word phrase: “Made in China”. I wonder how many products that are never available in China at all are assembled in China.</p>

-<p>There’s only one button and one knob on the front panel of the SD-20. This is even more cut down than the SC-8820, which also has only one button and one knob, but the volume knob doubles as a preview button.</p>

-<p>Roland clearly made SD-20 the intended successor of SC-8820. Just look at the pictures in the manuals. They have nearly identical form factors. Let’s see how their sounds will compare.</p>

-<p>The choice of ports is kind of weird on the SD-20. It’s almost identical to the ports on the back of the SC-8820, except the audio input being replaced by a 3.5mm combo jack, addition of an optical S/PDIF TOSLINK port, and omission of the DIN MIDI out port. The serial port (mini DIN 8-pin) featured on all older SC models made its only reappearance in the SD series. Despite having an audio input port, the SD-20, just like its predecessors in the SC family, doesn’t have any digital audio interface functionality. The audio input is merely passed through to the analog output.</p>

-<a href="//filestorage.chrisoft.org/blog/img/sd20_module.jpg"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_1536x1536_sd20_module.jpg"></a> <br>SD-20 on top of the SD-80

-<a href="//filestorage.chrisoft.org/blog/img/sd20_bottom.jpg"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_1536x1536_sd20_bottom.jpg"></a> <br>Bottom with serial number censored

-<p>Like the SD-80, Roland has discontinued driver support for the SD-20. The SD-20 will not even appear powered on if you choose to power the unit through USB bus power and have no driver installed. The same trick to make SD-80’s driver work on Windows 10 also works for the SD-20. You can search the Internet for the trick, or check out my first post on the SD-80 for the directions.</p>

-<p>The module works out of the box on Linux as long as you have proper kernel support (that is, you shouldn’t have to worry about this unless you build the kernel yourself). Required kernel modules are identical to those of the SD-80.</p>

-<p>The use of RCA jacks for analog audio output means that I don’t have the suitable cable to connect them to my audio interfaces at the moment. Fortunately I can still make digital recordings thanks to the inclusion of the S/PDIF output. The digital signal has a sample rate of 44100 Hz, the same as SD-80.</p>

-<p>(Unless otherwise stated, all hardware demos in this section are recorded through the digital S/PDIF interface with EDIROL UA-25. All files are level normalized to -1 dB. Excerpts are not normalized after being extracted from the normalized original.)</p>

-<p>With a few exceptions, preset instruments shared by the SD-20 and the SD-80 sound roughly identical. However, note the different mix levels on each model.</p>

-Excerpt from AMEDLEY.MID by Earl Gray Fowler from Voyetra Technologies, arranged for SD-80 (Native Mode)

-<p>However significant differences show up as soon as you start tuning any non-GM1 controls (this includes new controls defined by GM2, e.g.&nbsp;cc 74).</p>

-<p>What make this module nearly unusable is its 64 voices polyphony. Roland has been using this “voice” concept for polyphony since the very beginning of their PCM based synths. An instrument can have up to four “layers” (or “WGs”, wave generators in Roland’s terms) in these Roland PCM synthesizers. Each layer can consist of up to two channels (for stereo samples). Each one of these channels takes up a “voice” when played. The contemporary set and solo set of the StudioCanvas make heavy use of layering, as well as stereo samples. Some of these patches casually use up to 4 voices per note, with a (theoretical) maximum of 8. Unlike the SC-8850 vs SC-8820, when Roland stripped down the polyphony of the SD-20, they did not create simplified patches that use fewer voices like they did for the SC-8820. This immediately brings down the actual note polyphony of the SD-20 down to the same (or even lower) level of SC-55, and is no where near usable. Hence in terms of polyphony, the SD-20 is a downgrade compared to its predecessor SC-8820: Even you have Roland’s (then) latest studio sounds inside a tiny box, you have to take great precaution while using them, as they deplete your available polyphony <em>very</em> fast. Both tracks below demonstrate how 64 voices is nowhere close to enough for the SD-20.</p>

-“Crude” replica of Septette for a Dead Princess by ZUN. The original tuning was not replicated.

-<p>The SD-20 drops notes like crazy in the final section. The SD-20 MIDI Converter drops percussion notes instead.</p>

-<p>Unlike my SD-80, which sometimes messes up timing a bit and slows down when the load is high, the SD-20 simply cut off existing notes instantly without causing timing errors.</p>

-<p>Besides the obvious fact that Loose Lips is missing, pay attention to the way the piano notes are cut short. Also note each model has its own filter response for the synth bass.</p>

-<p>Finally, a GM-ish track for comparing vanilla GM2 patches without any tweaking. Reed Romance and SH-2 Lead from the SD special set are used in this adaptation.</p>

-AMEDLEY.MID by Earl Gray Fowler from Voyetra Technologies, arranged for SD-80 (Native Mode)

-<p>Patches in SD-80’s special set are substituted with patches in the solo set when played with the SD-20 Converter. However hardware SD-20 doesn’t do this substitution and doesn’t produce any sound if a patch from SD-80’s special set is selected, making the last two segments sound like a backing track on the SD-20. The choir in the ballad segment also has a notably shorter release on the hardware SD-20, possibly to mitigate the impact of a reduced polyphony.</p>

-<p>The SD-20 MIDI Converter is actually a reasonably good recreation of the SD-20 sounds. That is not saying so much, as the hardware of SD-20 itself is simply not capable of recreate the StudioCanvas sounds very well if the MIDI sequence you feed to it has any complexity to it at all. Sometimes the output from converter is actually closer to the SD-80 than the SD-20, especially if you take parameter response curves into consideration.</p>

-<p>The official SD-20 editor can only tune GM2 parameters. The available parameters are even fewer than the HyperCanvas (HQ-GM2) or TTS-1, mostly because the SD-20 doesn’t expose those parameters at all. As mentioned in my first post on the SD-80, the SD-20 editor is essentially the SD-90 editor with the audio / AFX section removed.</p>

-<a href="//filestorage.chrisoft.org/blog/img/sd20_editor_main.png"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_600x600_sd20_editor_main.png"></a> <br>SD-20 editor. SD-90 GM2 editor on the right for comparison.

-<a href="//filestorage.chrisoft.org/blog/img/sd20_editor_mixer.png"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_600x600_sd20_editor_mixer.png"></a> <br>The mixer. It has a very similar layout to the main page of HyperCanvas / TTS-1.

-<a href="//filestorage.chrisoft.org/blog/img/sd20_editor_synth.png"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_600x600_sd20_editor_synth.png"></a> <br>The instrument editor. Only GM2 parameters are exposed.

-<a href="//filestorage.chrisoft.org/blog/img/sd20_editor_instp.png"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_600x600_sd20_editor_instp.png"></a> <br>The instrument picker. The instrument picker of the SD-90 GM2 editor is on the right.

-<p>The SD-80 editor doesn’t work on the SD-20. Nor does the XV-2020 (which uses the same synth engine as the SD-20) editor. This makes the SD-20 far less editable than the SD-80. Forget about manually piecing together presets on the SD-20 to mimic the SD-80. I don’t even know how to change the samples used by a part on the SD-20 or is it even possible (the MIDI implementation doesn’t mention it).</p>

-<p>The address mapping used by SD-20’s DT1 system exclusive messages is similar to that employed by GS-based Sound Canvas models. Therefore the SD-20 is still somewhat editable, but nowhere close to the level offered by the SD-80. GSAE (GS Advanced Editor) may work with the SD-20, but there could be major compatibility issues.</p>

-<p>The SD-20 still responds to GS NRPN messages in native and GM2 mode. SD-90 and SD-80 doesn’t have such behavior.</p>

-<p>SD-20 has a special NRPN for selecting sound sets (MSB: <code>0x41</code> LSB: <code>0x00</code>, send set # to value MSB) in GM2 mode. On the SD-90 and SD-80, only system exclusive messages can be used to select sound sets in GM2 mode. The manual mentioned this feature, however it doesn’t tell you which NRPN to use.</p>

-<p>This really doesn’t deserve its own paragraph, but here it is. Unless otherwise noted, this is referring to the English manual, not the Japanese version (which is somewhat better, but still horrible).</p>

-<p>The user manual of Roland products has been criticized for being convoluted, unclear and difficult to navigate through for a long time. The user manual for SD-20 is on a whole new level. It’s an absolute abomination.</p>

-<p>To be fair, it’s not like one can write a lot about a product that only have one button and one knob on the front panel. Someone in Roland must have been forced through this …</p>

-<p>Content wise, it’s an amalgamation of SD-80’s “owner’s manual” and “quick start guide”. This make the entire thing even more confusing. You can find traces of SD-80’s manual everywhere. Just take a look at the huge gaps in the instrument list and drum set list. That sad drum set table even has a missing border. There’s also the sentence that goes something like this “you can’t edit the sounds in GS mode using the front panel” <a id="n1" href="#note1" class="note">[1]</a>, which is copied straight from SD-80’s manual. Well, duh … you can’t do much editing with one button (which instantly erases all changed parameters when pressed) and one knob in any mode!</p>

-<p>Since the SD-20 can only be controlled through MIDI, there would be plenty of information on how to operate the module using MIDI messages in the manual, right? Here Roland took the worst move imaginable and included ZERO information on that in the English manual, not even the system exclusive messages to switch between sound generator modes (the Japanese manual does include this), nor does it include a list of parameters that can be controlled by MIDI. It’s almost like Roland doesn’t want you to learn about the parameters it has at all, unless you read the ultra technical MIDI implementation (which, to make it even better, only has a download for the Japanese version left on the official website. Screw everyone who can’t read Japanese I guess).</p>

-<p>I spent $100 on this thing mostly because I’m curious about its insides. After testing it out, I don’t have any hope that there’s a chance this thing could have an XV chip inside. Having no screwdrivers did not hinder me even a little bit. I used the scissors in my nail care kit to remove the only 4 screws in the bottom of the module, and one screw holding the board. The board came out without any resistance.</p>

-<a href="//filestorage.chrisoft.org/blog/img/sd20_board_bottom.jpg"><img style="width: 50%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_1536x1536_sd20_board_bottom.jpg"></a> <br>No ICs on the bottom side of the board. The scissor used to undo the screws is visible.

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#ff0000;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_cpu.jpg">CPU (SH7016)</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#ffa000;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_io.jpg">8bit MCU, I/O Controller</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#fff300;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_cpu.jpg">4 Mb System DRAM</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#00f300;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_cpu.jpg">16 Mb Flash</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#00ffff;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_io.jpg">RS-232 driver</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#00a0ff;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_xp.jpg">Synth DSP (RA0C-003, “XP7”)</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#00c060;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_audioio.jpg">4Mb Effects DRAM</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#0000ff;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_wrom.jpg">2 * 128 Mb Wave ROM</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#a000ff;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_audioio.jpg">Digital Audio Modulator, S/PDIF interface</a></p>

-<p><x style="display:inline-block;width:0.9em;height:0.9em;border:solid 2px #888;background-color:#ff60ff;margin-right:0.5em;transform: translateY(0.2em);"></x> <a href="//filestorage.chrisoft.org/blog/img/sd20_audioio.jpg">DAC (AK4382A)</a></p>

-Click any IC above for a detailed shot of components around that chip.<br> <a href="//filestorage.chrisoft.org/blog/img/sd20_board_top.jpg">Click here for the whole board shot without the IC markings.</a>

-<p>No, it isn’t an XV chip. It’s an XP7 (RA0C-003) chip. This chip is also used by the bottom-of-the-barrel model in the XV line-up, the XV-2020. This is likely the final iteration of the codename XP. The CPU is a SH7016, same as SC-8850 and SC-D70. Other major chips include two 4Mbit EDO DRAM chips (one for CPU and one for XP7), a 16Mbit flash memory for system and parameters, and two 128Mbit Wave ROM chips. The part number and mask ID of the wave ROMs are different from those used by the SD-80 (either in the service manual or my particular module), suggesting they may contain different data.</p>

-<p>This is a major let down, sort of speak. The hardware is almost as capable as the XV-2020 (which has a larger CPU RAM and flash memory chip, 16Mbit and 32Mbit respectively). The XP7 is even capable of using 40 types of classical JV/XP insertion effects (MFX), which is not used at all by the SD-20. Maybe the reduced system resources prevented Roland to squeeze the XV-level editability inside.</p>

-<p>The XP7 chip runs much hotter compared to the XV chip in the SD-80. It’s almost too hot to touch when the synthesizer load is high. The XP7 chip in the SD-20 is clock much higher than any previous XP chips (33.868 MHz vs 24.576 MHz) to achieve the 44.1 kHz digital output, which is probably the cause of the excessive heat. For a more detailed technical assessment of the chip (and other Roland PCM synth chips), see <a href="https://chrisoft.org/blog/post/2020-11-20.html#tocanch16">my second post on SD-80</a>.</p>

-<p>There are 4 unpopulated switch headers on the board. Two are DPDT switches (SW4 and SW2), two seem to be buttons (SW3 and SW5). SW4 and SW5 seem to be electrically connected to the peripherals of the USB controller, SW2 and SW3 seem to be connected to the CPU. One side of SW4 seems to short the USB power. SW2 resets the unit. SW3 puts the unit into an inoperable state (USB indicator turns off, SPIDF output shuts down, does not respond to any key press / MIDI input). SW2 is weird. One side of the upper pole shorts the power to ground. The same side of the lower pole puts the unit into another inoperable state (just like frozen in place). The other side doesn’t do anything consistent. Sometimes the upper pole acts like a perpetual sustain pedal if engaged (no notes are released even after letting the connection go). All of these switches behave the same in test mode and doesn’t seem to affect boot mode selection.</p>

-<td style="text-align: center;">Roland R02677490 RA0C-003 JAPAN 0645EGI B0106ZAC</td>

-<td style="text-align: center;">Roland R03010612 23C128BL832J 0620K7002</td>

-<td style="text-align: center;">Roland R03010623 23C128BL833K 0620K7005</td>

-<td style="text-align: center;">EliteMT M11L416256SA- 35T SZV2C51GR 0627</td>

-<td style="text-align: center;">LH28F160BJE-BTL80 SHARP JAPAN 0631 5 XN</td>

-<td style="text-align: center;">Flash Memory, 16 Mbit, System / Parameters</td>

-<td style="text-align: center;">EliteMT M11L416256SA- 35T SZV2C51GR 0627</td>

-<p>It seems dead easy to enter the secret test mode on the SD-20 – there’s only one button. Hold the button and turn the power on, the USB indicator will light up. This is the boot mode selection prompt. Release the button. Now you have around 4 seconds to do one of the following:</p>

-<li>Pressing the button three times. The unit will boot into an unknown mode (likely firmware update).</li>

-<p>If your action matches none of these, the unit will boot into normal mode.</p>

-<p>This section will employ the following notation for the status of the indicator LEDs.</p>

-<p>The test mode is far less interesting than that of the SD-80 because I don’t necessarily understand what does every indicators pattern mean.</p>

-<h3 id="tocanch10" class="tvis">unknown (likely firmware update) mode</h3>

-<p>For a low, low price of $300 in 2002, you get 3 set of mediocre (with a few exceptions) GM2 patches. The sounds themselves are reasonably new and refreshing back then, but the higher average voice-per-note of the new StudioCanvas sounds make the SD-20 a less desirable choice than previous 64-polyphony models. The lack of advanced editing of any sort removes all possibility to explore custom sound design with the module. It’s a cheaply built unit that Roland asked for too much. Even for a Touhou music fanatic today, there are much cheaper ways to get access to the most sought-after instruments.</p>

-<p>My SD-20 is in temporary coma right now, as it’s receiving a brain surgery …</p>

-<a href="//filestorage.chrisoft.org/blog/img/sd20_wromds.jpg"><img style="width: 48%;" src="//filestorage.chrisoft.org/blog/img/ssbsthumb_1536x1536_sd20_wromds.jpg"></a> <br>I don’t know what I’m doing …

- <div class="TText" id="notediv" style="font-size:80%;"><span class="TText"><a id="note1" href="#n1">[1]</a>: Had to paraphrase this, because Roland prohibits reproducing contents from their manuals…<br></span></div>